PRODUCTS
CONTACT US
ARM series You are here：HOME >> PRODUCTS >> Embedded module >> ARM series
Description
TQMa6ULx Energy efficient for future designs
The Minimodule TQMa6ULx, based on the i.MX6UL from NXP, combines the ARM Cortex-A7 core technology with a variety of interfaces. The integrated graphics controller supports applications with display and touch screen requirements. For various applications such as, industrial automation and controls with requirements for low power and secure data processing, there are three CPU variants available. With a Single Cortex™-A7 core and a clock rate up to 528 MHz the TQMa6ULx provides a balanced ratio between applications for visualization and control performance and power dissipation.
The highlights:
·Graphic
·Extended temperature range
·2x Ethernet with IEE1588
·Low power consumption (typ. 1 W)
·Camera Sensor Interface
·Security functions
·Long term availability
Technical specification
Microprocessor
i.MX6UL-1, i.MX6UL-2, i.MX6UL-3
System interfaces
Up to 2x Ethernet 10/100 Mbit
Up to 2x CAN
Up to 2x USB 2.0 high speed OTG interface
Up to 8x UART
Periphery interfaces
Up to 2x SDIO/MMC
Up to 4x I²C
Up to 4x SPI
Up to 3x I²S
Graphic
LCD Interface (24 Bit RGB)
1 x 16 Bit Camera Sensor Interface
Memory
DDR3L-SDRAM: Up to 1 GB
Quad SPI NOR: Up to 256 MB
Up to 32 GB eMMC-Flash
EEPROM: 0 / 64 kbit
Other
Real Time Clock (RTC)
Temperature sensor
CPU JTAG Interface
Power supply
5 V
Ambient conditions
Standard temperature range: -25°C…+85°C
Extended temperature range: -40°C…+85°C
Dimensions
46 mm x 32 mm
Plug-in system
Board-to-board plug-in system 200 pins
Operating systems
Linux
Operating systems on request
VxWorks, QNX, WIN EC 2013
Ordering information
TQMa6UL1-AA
TQMa6UL1, Cortex-A7 / 528 MHz, 4 GB eMMC Flash
256MB DDR3L, 64 kB EEPROM, -25°C …+85°C
TQMa6UL2-AA
TQMa6UL2, Cortex-A7 / 528 MHz, 4 GB eMMC Flash
256MB DDR3L, 64 kB EEPROM, -25°C …+85°C
TQMa6UL3-AA
TQMa6UL3, Cortex-A7 / 528 MHz, 4 GB eMMC Flash
256 MB DDR3L, 64 kB EEPROM, -25°C …+85°C
STKa6ULx-AA
STKa6 (Eval Kit) with TQMa6ULx-AA, Cortex-A7 / 528 MHz, 256
MB DDR3L, 4 GB eMMC Flash,
64 kB EEPROM, 1x RS232, 1x RS485, 2 x CAN 2.0B separated
3x USB 2.0 HOST, 1x USB 2.0 OTG, 2x ETH 10/100,
LCD Port, 1xHDMI, LVDS, 1x Mini PCIe (only USB), RTC,
Temperature sensor, Reset-Button, SD interface,
Power supply, 4 GB SD card, Cables
Starter kit STKa6ULx set
The core of the STKa6ULx set is the TQMa6ULx module with a
Cortex-A7 CPU. The components contained in the starter kit
constitute a modular system enabling you to develop your
own product ideas. Development of graphic interfaces can
be started immediately using the prepared combination of
closed display unit and starter kit that are matched to each
other. To develop your own hardware you can use the certified
and qualified circuit components of the starter kit in your own
designs.
- PRODUCTS
- LRC
- Frank
- Embedded module
- Diode series（TRR、ST、LRC）
- UTC
- Transistor series（ST、LRC）
- Capacitance series
- Fuse series（DA）
- MOS series
- Resistance series
- CONTACT US
- Tel: 0755-82642360
Fax: 0755-82642380
E-mail: sale@enxic.com
Address: Shenzhen city Longhua District Long Lu Zehua Building ten unit 1009 room
- [QR code]