TQMa6x The Multimedia module
The Minimodule TQMa6x, based on the processor i.MX6 from NXP, combines Industry and Multimedia. The integrated graphic controller supports displays with a resolution up to Full HD.
Therefore the module is best suited for HMI and animated display screen- and accordingly multitouch applications. With an ARM Cortex™ A9 core and a clock rate up to 4 x 1,2 GHz the TQMa6x provides a balanced ratio between performance and power dissipation.
The highlights:
·Graphic
·Extended temperature range
·e-MMC Flash
·NOR Flash
·Low power consumption (typ. 4 W)
·Long-term availability
·IEEE 1588 support
·Security functions
Technical specification
Microprocessor
MCIMX6 Solo/Dual Lite/Dual/Quad Cortex-A9
System interfaces
1x Ethernet 10/100/1000 Mbit (IEEE 1588)
2x FlexCAN
1x USB 2.0 high speed OTG interface
1x USB 2.0 high speed HOST interface
Up to 5x UART
Periphery interfaces
Up to 2x USB 2.0 High-Speed Inter-Chip (HSIC)
WEIM Bus
Up to 3x SDIO/MMC
Up to 2x I²C
Up to 5x SPI
Up to 3x SSI/I²S
ESAI
2x 16 bit Camera I/F
SATA
PCIe
SPDIF
Graphic
DVI (HDMI)
Parallel 2x 24 bit (RGB)
Dual LVDS
Memory
DDR3L-SDRAM: Up to 2 GB (MCIMX6 Solo with 1 GB)
e-MMC: Up to 16 GB
NOR: Up to 128 MB
EEPROM: 0 / 64 kbit
Other
Real Time Clock (RTC)
Temperature sensor
CPU JTAG Interface
Power supply
5 V
Ambient conditions
Standard temperature range: -25°C…+85°C
Extended temperature range: -40°C…+85°C
Dimensions
70 mm x 46 mm
Plug-in system
Board-to-board plug-in system 360 pins
Operating systems
Linux, VxWorks, QNX
Operating systems on request
Windows Embedded 7, Android
Ordering information
TQMa6S-AA
TQMa6S, Solo Cortex-A9 / 800 MHz, 4 GB e-MMC flash,
512 MB DDRL3, 64 kbit EEPROM, -25°C …+85°C
TQMa6U-AA
TQMa6U, Dual Lite ARM Cortex A9 (i.MX6) / 800 MHz, 4 GB
e-MMC Flash, 1 GB DDR3L, 64 kB EEPROM, -25°C...+85°C
TQMa6D-AA
TQMa6D, Dual Cortex-A9 / 800 MHz, 4 GB e-MMC flash,
1 GB DDRL3, 64 kbit EEPROM, -25°C …+85°C
TQMa6Q-AA
TQMa6Q, Quad Cortex-A9 / 800 MHz, 4GB e-MMC flash,
1 GB DDRL3, 64 kbit EEPROM, -25°C…+85°C
Further variants such as SPI NOR or extended temperature
range (-40°C … +85°C) are available on request.
STKa6D-AA
STKa6x (Eval Kit) with TQMa6D-AA, Dual Cortex-A9 / 800 MHz,
1 GB DDR3, 4 GB e-MMC Flash, 64 kbit EEPROM,
1x RS232, 1x RS485, 2 x CAN 2.0B separated, 3x USB 2.0 HOST,
1x USB 2.0 OTG, 1x ETH 10/100/1000, 1 x ETH 10/100,
1x Mini PCIe, DVI (HDMI), 1x PCIe, 2x LVDS, Sound, RTC,
Temperature sensor, Reset button, SD interface,
Power Supply, 4 GB SD card, Cables
Starter kit STKa6D set
The core of the STKa6D Set is the TQMa6D module with a
Dual Cortex-A9 CPU from Freescale. The components
contained in the starter kit constitute a modular system enabling
you to develop your own product ideas.
Development of graphic interfaces can be started immediately
using the prepared combination of closed display
unit and starter kit that are matched to each other. To develop
your own hardware you can use the certified and qualified
circuit components of the starter kit in your own designs.