Welcome to Shenzhen Enxic Electronics Co., ltd official website
PRODUCTS
CONTACT US
Tel: 0755-82642360
Fax: 0755-82642380
E-mail: sale@enxic.com
Address:Shenzhen city Longhua District Long Lu Zehua Building ten unit 1009 room
PRODUCTSYou are here:HOME >> PRODUCTS
Product Name:TQMLS102xA module
 

File Name Format Size

TQMLS102xA ModulePDF

Description
TQMLS102xA  For the networks of tomorrow 

The Minimodule TQMLS102xA, based on the processor LS102xA from
NXP, combines the ARM® core Architecture with the QorIQ® high
speed communication technology. The integrated graphics controller
supports applications with display and touch.
For various applications such as networking, industrial automation and
controls with requirements for fast and secure data processing, there
are three CPU variants available.
The Dual-Core ARM® Cortex™ A7 core provides a cache Coherent
Interconnect bus system and a clock rate up to 2 x 1,0 GHz.
Thus the Embedded module TQMLS102xA- provides a balanced ratio
between high performance and power dissipation.

The highlights:
·Graphic
·QorIQ QUICC Engine
·High speed communication via 3x Gigabit Ethernet,
2x PCle and one USB 3.0 interface
·Low power consumption (typ. 3 W)
·ECC protection
·Cache Coherent Interconnect bus system
·IEEE 1588 hardware support
·Security functions

Technical specification
Microprocessor
QorIQ LS1020A, LS1021A, LS1022A

System interfaces
Up to 3x Ethernet 10/100/1000 Mbit (IEEE 1588)
Up to 4x FlexCAN
Up to 1x USB 2.0 high speed OTG interface
Up to 1x USB 3.0 high speed HOST interface
Up to 6x UART

Periphery interfaces
Up to 1x SDIO/MMC
Up to 3x I²C
Up to 2x SPI
Up to 4x I²S
Up to 1x SATA 3.0
Up to 2x PCIe
SPDIF

Graphic
LCD interface (only LS1021A)

Memory
DDR3L-SDRAM: Up to 2 GB
Quad SPI NOR: Up to 512 MB
eMMC: Up to 16 GB
EEPROM: 0 / 64 kbit
ECC protection (only LS1020A, LS1021A)

Other
Real Time Clock (RTC)
Temperature sensor
CPU JTAG interface
Extended power management (optional)
Voltage monitoring (optional)

Power supply
3,3 V 

Ambient conditions
Extended temperature range: -40°C…+85°C

Dimensions
55 mm x 44 mm

Plug-in system
Board-to-board plug-in system 280 Pins

Operating systems
Linux

Operating systems on request
VxWorks, QNX, PikeOS

Ordering information (preliminary)

TQMLS1020A-AA
TQMLS1020A, Dual Cortex 7 / 1 GHz, 64 MB NOR flash,
1 GB DDR3L, 64 kbit EEPROM, -40°C …+85°C

TQMLS1021A-AA
TQMLS1021A, Dual Cortex 7 / 1 GHz, 64 MB NOR flash,
1 GB DDR3L, 64 kbit EEPROM, -40°C …+85°C 

TQMLS1022A-AA
TQMLS1022A, Dual Cortex 7 / 600 MHz, 64 MB NOR flash,
512 MB DDR3L, 64 kbit EEPROM, -40°C …+85°C

STKLS102xA-AA (Prototypes Q1/15)
STKLS102xA (Eval Kit) with TQMLS102xA-AA, Dual Cortex A7/
1 GHz (600 MHz), 1 GB DDR3L, 256 MB NOR flash, 64 kbit
EEPROM, 1x RS232, 1x RS485, 2 x CAN 2.0B separated, 3x USB
3.0 HOST, 1x USB 2.0 OTG, 2x ETH 10/100/1000, LCD Port,
1xHDMI, LVDS, 2x PCIe, RTC, Temperature sensor, Reset button,
SD interface, Power Supply, 4GB SD card, Cable

Starterkit STKLS102xA set
The core of the STKLS102xA set is the TQMLS102xA module
with a Dual Cortex
™ A7 CPU from NXP. The components con
-
tained in the starter kit constitute a modular system enabling
you to develop your own product ideas. Development of
graphic interfaces can be started immediately using the pre
-
pared combination of closed display unit and starter kit that
are matched to each other. To develop your own hardware
you can use the certified and qualified circuit components of
the starter kit in your own designs.