TQMa53 The Multimedia module
The Minimodule TQMa53, based on the processor i.MX537 from NXP,
combines Industry and Multimedia. The integrated graphic controller
supports displays with a resolution up to UXGA. Therefore the module
is best suited for HMI and animated display screen- and accordingly
multitouch applications.
With an ARM Cortex™ A8 core and a clock rate up to 1,2 GHz the
TQMa53 provides a balanced ratio between performance and power
dissipation.
The highlights:
·Graphic
·Extended temperature range
·e-MMC flash
·Low power consumption (typ. 3 W)
·Long-term availability
·IEEE 1588 support
·Security functions
Technical specification
Microprocessor
MCIMX537 / MCIMX535
System interfaces
1x Ethernet 10/100 Mbit (IEEE 1588)
2x FlexCAN
Up to 5x UART
2x USB 2.0 high speed HOST interface
1x USB 2.0 high speed OTG interface
Periphery interfaces
WEIM Bus*
Up to 3x SDIO/MMC
Up to 2x I²C
Up to 3x CSPI
Up to 3x SSI/I²S
ESAI
1x 16 bit Camera I/F
SATA
SPDIF
Graphic
Analog VGA
Parallel 1x 24 bit (RGB) UXGA*
Dual LVDS UXGA
Memory
DDR3-SDRAM: up to 1 GB
e-MMC: up to 16 GB
EEPROM: 0 / 64 kbit
Other
Real Time Clock (RTC)
Temperature sensor
CPU JTAG Interface
Supervisor 5 V
Power supply
5 V
Ambient conditions
Standard temperature range: -25°C…+85°C
Extended temperature range: -40°C…+85°C
Dimensions
55 mm x 44 mm
Plug-in system
Board-to-board plug-in system 240 Pins
Operating systems
Linux, QNX
Operating systems on request
WEC 7, Android
Ordering information
TQMa53-AA
TQMa53, i.MX537 / 800 MHz, 4 GB e-MMC flash, 512 MB DDR3,
64 kbit EEPROM, -25°C …+85°C
For further product variants please visit our website:
www.tq-group.com/en/TQMa53
STKa53-AA
STKa53 (Eval Kit) with TQMa53-AA, i.MX537 / 800 MHz,
512 MB DDR3, 4 GB e-MMC flash, 64 kbit EEPROM,
1x RS232, 1x RS485 , 2 x CAN 2.0B separated, 3x USB 2.0 HOST,
1x USB 2.0 OTG, 2x ETH 10/100, CRT, 2x LVDS, Line Out,
Mono Mic In, Line In, RTC, Temperature sensor, Reset button,
SD interface, Power Supply, 2 GB SD card, Z-Modem cable,
USB cable, DVI-VGA adapter, DVI-HDMI adapter
Starter kit STKa53 set
The core of the STKa53 set is the TQMa53 with the i.MX53 CPU
from Freescale.
With the preconfigured starter kit you can start immediately
with the development of your application in order to achieve
a fast time-to-market.
To develop your own hardware you can use the certified and
qualified circuit components of the starter kit in your own
designs.
A large accessory kit enables the connection of commercial
monitors. Different display solutions for a direct connection to
LVDS / TTL are available upon request.