Brand agent
CONTACT US
ARM series modulesYou are here：HOME >> Brand agent >> TQ >> ARM series modu...
Description
TQMa7x Energy efficient for future designs
The Minimodule TQMa7x, based on the i.MX7 from NXP, combines an
ARM Dual Cortex-A7 core technology with a variety of interfaces. The
integrated graphics controller supports applications with display and
touch screen requirements. For various applications such as networking,
industrial automation and controls with requirements for fast and
secure data processing, there are two CPU variants available. With a
Single- / Dual-Core ARM Cortex™-A7 core and a clock rate up to 2 x 1,0
GHz the TQMa7x provides a balanced ratio between high performance
and power dissipation.
The highlights:
·Graphic with full HD support
·Extended temperature range
·High-Speed communication via 2x Gigabit Ethernet and 1x PCle interface
·Low power consumption (typ. 2 W)
·Integrated Cortex M4
·IEEE 1588 hardware support
·Security functions
Technical specification
Microprocessor
i.Mx7S, i.Mx7D
System interfaces
Up to 2x Ethernet 10/100/1000 Mbit
Up to 2x CAN
Up to 2x USB 2.0 high speed OTG interface
Up to 1x USB 2.0 high speed HOST interface
Up to 7x UART
Graphic
LCD Interface (24 Bit RGB)
Up to 2 Camera Sensor Interface (24Bit /MIPI)
Memory
DDR3L-SDRAM: Up to 2 GB
Quad SPI NOR: Up to 256 MB
Up to 32 GB eMMC flash
EEPROM: 0 / 64 kbit
Other
Integrated Cortex M4
Real Time Clock (RTC)
Temperature sensor
CPU JTAG Interface
Power supply
5 V
Ambient conditions
Standard temperature range: -20°C…+85°C
Dimensions
54 mm x 44 mm
Plug-in system
Board-to-board plug-in system 320 pins
Operating systems
Linux
Operating systems on request
VxWorks, QNX, WIN EC 2013
Ordering information
TQMa7S-AA
TQMa7S, i.MX7S (Single Cortex-A7) / 800 MHz, 4 GB eMMC
Flash, 512 MB DDR3L, 64 kB EEPROM, -20°C …+85°C
TQMa7D-AA
TQMa7D, i.MX7D (Dual Cortex-A7) / 1,0 GHz, 4 GB eMMC Flash
512 MB DDR3L, 64 kB EEPROM, -20°C …+85°C
STKa7x-AA
STKa7x (Eval Kit) with TQMa7x-AA, Dual Cortex-A7 / 1,0 GHz,
512 MB DDR3L, 4 GB eMMC Flash,
64 kB EEPROM, 1x RS232, 1x RS485, 2 x CAN 2.0B separated
3x USB 2.0 HOST, 1x USB 2.0 OTG, 2x ETH 10/100/1000,
LCD Port, 1xHDMI, LVDS, 1x Mini PCIe, RTC,
Temperature sensor, Reset-Button, SD interface,
Power supply, 4 GB SD card, Cables
Starter kit STKa7x set
The core of the STKa7x set is the TQMa7x module with a Dual
Cortex-A7 CPU. The components contained in the starter kit
constitute a modular system enabling you to develop your
own product ideas. Development of graphic interfaces can
be started immediately using the prepared combination of
closed display unit and starter kit that are matched to each
other. To develop your own hardware you can use the certified
and qualified circuit components of the starter kit in your own
designs.
- PRODUCTS
- LRC
- Frank
- Embedded module
- Diode series（TRR、ST、LRC）
- UTC
- Transistor series（ST、LRC）
- Capacitance series
- Fuse series（DA）
- MOS series
- Resistance series
- CONTACT US
- Tel: 0755-82642360
Fax: 0755-82642380
E-mail: sale@enxic.com
Address: Shenzhen city Longhua District Long Lu Zehua Building ten unit 1009 room
- [QR code]